13361 Saddle Road STE 109, Ft Myers, FL 33913

239-322-3919 x3

About Liftmatic

MOTION CONTROL EXPERTS

Gas Springs • Dampers • Shock Absorbers • Air Springs

LiftMatic is located in Fort Myers, Florida
comprising of Engineering, Test labs, product assembly and warehousing. LiftMatic provides motion control assemblies including, Gas spring lift supports, Dampers, Shock absorbers and Air springs.

LiftMatic specializes in engineering products to fit customer requirements, with onsite CAD design, prototype build and testing facilities we can develop high quality products and deliver them to the customer in quick succession.

LiftMatic provides motion control assemblies as a Tier 1 supplier to OE manufacturers. These OE customers include some of the largest Automotive, Construction and Farm equipment companies in the world. Products are designed in the USA at our Fort Myers, FL Engineering center.

Our catalog will supply you with a complete list of LiftMatic standard parts and custom engineered parts for higher volumes.

Phone: 239-322-3919 – Ext. 3 • E-Mail: [email protected]  13361 Saddle Road • Suite 109 • Fort Myers, FL 33913

Testing Capabilities

Liftmatic has a state-of-the-art test lab used to both develop gas spring designs and to test the durability of the finished design. In addition to the items below Liftmatic has vibration test equipment, Durability testing and a Linear motor dynamometer

ISO Certificate

lnstron 3367
Automatic recognition and calibration of load and strain transducers
Preloaded ball screws, precision guidance columns, and a symmetrical drive system improve frame stiffness and alignment

Singleton SCCH20
Singleton SCCH accelerated corrosion test chamber for Salt, Fog, Humidity, Water fog, CASS to name a few.  Standard operating temperatures from Ambient to 120° for 49° C.  Capable of performing to ASTM B117
ASTM B368 (CASS) ASTM D1735
ASTM D2247, ISO 9227, ASTM G85 (A1 THROUGH A4).  Over 9 cubic feet test envelope

Cincinnati sub-zero Z8Plus

  • Both a temperature and Humidity tester
    -34°C to+190°c (-30°f to+375°n)
  • Humidity range 10% to 98%
  • Unlimited number of profiles
    with up to 99 steps and 1000 cycles
  • Alarm notification sends email or texts
  • Control the chamber remotely from any device

 

Smipo ST-500

  • 50,000 Kgf.cm or 4,903 Nm torque capacity
  • +!- 0.5% of reading up to 50,000 Kgf.cm or 4,903 Nm
  • Anti torsion 10,000Nm
  • Resolution 1/100,000
  • Used for Fatigue test, strength test, Torque wrench calibration
  • Used for end cap strength and fatigue
  • Connector strength and fatigue
  • Sub assembly strength and fatigue